FW 05.01.00 and SW 07.02.00 hp StorageWorks HA-Fabric Manager Server Installation Guide

HAFM Server Diagnostics
126 HA-Fabric Manager Server Installation Guide
MAP 0400: Loss of Server Communication
Substitute the following MAP steps for the one described in MAP 0400: Loss of
Server Communication in Director and Edge Switch service guides:
■ Step 16
■ Step 19
16
Upgrade the HAFM application. Refer to “Install or Upgrade HAFM Software”
on page 115.
Did the switch-to-server Ethernet connection recover?
NO YES
↓ The switch-to-server connection is restored and appears operational.
Exit MAP.
Contact the next level of support. Exit MAP.
19
Determine the internet protocol (IP) address of the HAFM server running the first
instance of the HAFM application.
1. After the HAFM server powers on and successfully completes POSTs, the
LCD panel displays a Welcome!! message, then continuously cycles
through and displays the following operational information:
■ Host name.
■ System date and time.
■ LAN 1 and LAN 2 IP addresses.
■ CPU temperature.
■ Hard disk capacity.
■ Virtual and physical memory capacity.
2. After a few seconds, the LCD panel displays the following (Figure 91):
Figure 91: LCD panel (LAN 2 IP address)
LAN 2:
010.001.001.001