FW 05.01.00 and SW 07.02.00 hp StorageWorks HA-Fabric Manager Server Installation Guide

115HA-Fabric Manager Server Installation Guide
B
Install or Upgrade HAFM
Software
This section describes the procedure to install or upgrade the HAFM application
to the rack-mount HAFM server. The HAFM application includes the switch
Product Manager and HAFM services applications.
Note: The procedures in this section supercede the procedures described in the Repair
Information chapter of the HP Storage Works Edge Switch and Director service
guides.
The HAFM application shipped with the switch is provided on the HAFM
Applications CD-ROM. Subsequent software versions for upgrading the switch
are provided to customers through the HAFM Applications CD-ROM or through
Hewlett-Packard’s home page.
Note: When installing or upgrading a software version, follow all procedural
information in the release notes or instructions that accompany the software version.
This information supplements information in this general procedure.
Note: During an HAFM application upgrade, HAFM monitoring of managed
Directors and Edge Switches is temporarily interrupted. Operational states of
managed Directors and Edge Switches are not affected.
To install or upgrade the HAFM application and associated applications to the
HAFM server:
1. Log out of all HAFM application sessions (local and remote) and exit the
HAFM application.
2. Insert the HAFM Applications CD-ROM into the CD-ROM drive of the
HAFM server.