fw 05.01.00 and sw 07.01.00 edge switch 2/24 product manager user guide

Monitoring and Managing the Switch
78 Edge Switch 2/24 Product Manager User Guide
Blocked states are:
— Blocked: Devices communicating with the port are prevented from
logging into the switch or communicating with other devices attached to
switch ports. A blocked port continuously transmits OLS.
— Unblocked: Devices communicating with the port can log in to the switch
and communicate with devices attached to any other unblocked port in the
same zone.
■ State
The following port operational states may display in this table. For more
information on these states and corresponding status symbol and LED
indicator operations in the Hardware View, refer to “FRU List View” on
page 93.
— No Light
—Online
— Offline
— Beaconing
—Link Reset
— Not Operational
— Not Installed
— Invalid Attachment
— Port Failure
— Segmented E_Port
— Link Incident
— Testing
—Inactive
■ Type
The type of port. If the Port State is online, the available port types are F_Port,
FL_Port, and E_Port. If the Port State is not online, the available port types
are the configured type: Gx_Port, G_Port, Fx_Port, F_Port, and E_Port.
■ Operating Speed
This field displays the current data speed for the ports as 1 Gb/sec or 2 Gb/sec
or Not Established.