fw 05.01.00 and sw 07.01.00 edge switch 2/24 product manager user guide

Monitoring and Managing the Switch
71Edge Switch 2/24 Product Manager User Guide
To enable and disable Periodic Date/Time Synchronization, select the check
box and then click Activate.
Figure 14: Configure Date and Time Periodic Synchronization dialog box
2. Perform one of the following steps:
— To immediately synchronize the switch date and time with the HAFM
server, be sure the Periodic Date/Time Synchronization option is
enabled and then click Sync Now.
Note: If you enable the Periodic Date/Time Synchronization feature and click Activate ,
the time will synchronize at the next update period.
— To set the switch with a specific date and time, make sure that the
Periodic Date/Time Synchronization field is not selected. Refer to
Figure 15. Enter the date and time and then click Activate.
Figure 15: Configure date and time manually
Note: Use the range of 0 to 23 for hours. Use the range of 0 to 59 for minutes and
seconds.