fw 05.01.00 and sw 07.01.00 edge switch 2/24 product manager user guide

Monitoring and Managing the Switch

61Edge Switch 2/24 Product Manager User Guide

Monitoring Hardware Operation

Determine hardware component operating status and states by the simulated light

emitting diode (LED) indicators and status symbols, such as flashing red and

yellow diamonds and yellow triangles, that appear on hardware components.

These simulated LEDs and status symbols reflect the state of the actual hardware

as changes occur. Corresponding or additional descriptions of hardware status and

states also display when you double-click components to display Properties

dialog boxes.

Figure 10 illustrates the Hardware View for the Edge Switch 2/24. The figure

includes examples of symbols and LED indicators that display to help you

monitor hardware operation. Numbers by each example are keyed to descriptions

under “Front View” on page 62 and “Rear View” on page 63.

Figure 10: Monitoring Hardware Operation - Edge Switch 2/24 Hardware View

1 Port Attention Indicator

2 Port LED Indicator

3 Port Failure Indicator

4 Beaconing

5 Not Installed

6 Power, System Error, and Unit

Beaconing Indicators

7 Power Supply Status