fw 05.01.00 and sw 07.01.00 edge switch 2/24 product manager user guide

Monitoring and Managing the Switch
58 Edge Switch 2/24 Product Manager User Guide
Hardware View
The Hardware View is the default view when you open the Product Manager. If
another view displays, display the Hardware View by selecting Hardware from
view tabs on the Product Manager window. Using this graphical view of the
switch, you can view status symbols and simulated light emitting diode (LED)
indicators, display data, and use mouse functions to monitor status and obtain vital
product information for the switch and its hardware components.
Identifying FRUs
Move the cursor over parts of the switch graphic in the Hardware View to display
labels identifying each hardware component and its slot position in the chassis
relative to identical components installed in the switch. Components include:
■ Power supply module. Note that each AC connector on the rear of the unit is
the location of an internal power supply (two total).
■ Ports (small form factor LC transceivers).
Monitoring Switch Operation
Monitor the operating status of the switch using the switch Status table on the
Hardware View and the status indicator on the status bar at the bottom of the
Product Manager window.
Switch Status Table
The Status table at the top of the Hardware View displays the switch’s
operational status, operational state, name, description, and location.
Status
Refer to Table 4 for the meaning of the text that displays in the switch Status table
and the corresponding status symbols that display on the status bar.