fw 05.01.00 and sw 07.01.00 edge switch 2/24 product manager user guide

Product Manager Overview
44 Edge Switch 2/24 Product Manager User Guide
Note: For Node Properties, if a node is not logged in, a message box displays
indicating that node information is not available.
For details on menu options, refer to “Port Menu” on page 72.
For details on navigating and monitoring via the Hardware View, refer to
“Hardware View” on page 58.
Port List View
Select the Port List view tab. A table listing the port number, port name,
block/unblock configuration, operating state, operating speed, port type, and alert
condition displays in the view panel. Figure 6 shows an example of the Port List
View.
Figure 6: Port List View
The Port List View displays information about all ports installed in the switch.
All data is dynamic and updates automatically. Double-click any row in this view
to display the Port Properties dialog box for the port.
Right-click a port row to display the same menu options that display when you
right-click a port in the Hardware View or a port’s bar graph in the Performance
View. These include:
■ Port Properties
■ Port Technology