fw 05.01.00 and sw 07.01.00 edge switch 2/24 product manager user guide

Product Manager Overview
43Edge Switch 2/24 Product Manager User Guide
immediate attention. For an explanation of the different status symbols and the
reasons they display in the Hardware View or Port List View, refer to Figure 10
on page 61.
Switch Menu
Double-click the switch graphic away from a FRU to display the Switch
Properties dialog box. Right-click a hardware graphic away from a FRU to
display the following options:
■ Switch Properties
■ Enable Unit Beaconing
■ Clear System Error Light
■ IPL Switch
■ Set Switch Date and Time
■ Set Switch Online State
For details on menu options, refer to “Switch Menu” on page 69.
For details on navigating and monitoring via the Hardware View, refer to
“Hardware View” on page 58.
Port Menu
Double-click a port to display the Port Properties dialog box. Right-click a port
to display the following options:
■ Port Properties
■ Port Technology
■ Block Port
■ Enable Beaconing
■ Port Diagnostics
■ Clear Link Incident Alert(s)
■ Reset Port
■ Port Binding
■ Clear Threshold Alert(s)
Note that these same options are available when you click a port on the Hardware
View and select the port secondary menu from the Product menu on the menu
bar.