fw 05.01.00 and sw 07.01.00 edge switch 2/24 product manager user guide

Product Manager Overview
41Edge Switch 2/24 Product Manager User Guide
Enable Call Home Notification
Note: The default setting for the Enable Call Home Notification function is disabled
(unchecked).
Select Enable Call Home Notification from the Maintenance menu to
enable the call-home function for the switch.
The parameters of the call-home feature are configured in Windows. Refer to
the HAFM server installation guide for instructions.
Backup & Restore Configuration
Select this option to save the product configuration stored on the switch to the
HAFM server hard disk or to restore the configuration data from the HAFM
server. Only a single copy of the configuration is kept on the server.
This backup is primarily for single-CTP systems, where a backup is needed to
restore the configuration data to a replacement CTP card. You cannot modify
the location or the file name of the saved configuration.
For additional information on using this option, refer to “Backing Up and
Restoring Configuration Data” on page 137.
Note: You can only restore the configuration to a switch with the same IP address.
Reset Configuration
Select this option to reset all switch configuration data back to the factory
defaults. A confirmation dialog box displays with a warning upon selecting
the option. For additional information on using this option, refer to “Reset
Configuration” on page 164.
Caution: This operation resets all configuration including any optional
features that have been installed. You will need to re-enter your feature key to
enable all optional features after resetting the configuration.
Help Menu
Click on the Help menu on the menu bar to display the following options.