fw 05.01.00 and sw 07.01.00 edge switch 2/24 product manager user guide

Product Manager Overview
40 Edge Switch 2/24 Product Manager User Guide
IPL
Select this option to initiate an initial program load on the switch. A dialog
box displays to allow you to confirm the IPL. Note that an IPL does not affect
any configuration settings done through the Product Manager. This operation
does not interrupt port operation.
Refer to “Execute an IPL”on page 156 for more information.
Set Online State
Select this option to display the Set Online State dialog box. Use this dialog
box to change the online state of the switch to offline or online.
Firmware Library
Select this option to display the Firmware Library dialog box. This dialog
box displays all firmware versions currently installed on the HAFM server
that can be downloaded to Edge Switches. Use this dialog box to add a new
firmware version to the HAFM server hard disk, modify the description
displayed for an existing version, delete a version from the PC, or download
(send) a version for operation on a switch. For additional information on using
this option, refer to the HP StorageWorks Edge Switch 2/24 Service Manual.
Enable E-Mail Notification
The Simple Mail Transfer Protocol (SMTP) server and e-mail recipient
addresses are configured in the HAFM application (not in the switch’s
Product Manager). E-mail notification is also initially enabled in the HAFM
for all Edge Switches managed by the HAFM. Note, however, that the E-Mail
Notification option on the Product Manager’s Maintenance menu must be
enabled (checked) for e-mail notification to occur for the specific switch.
The default setting for the Enable E-Mail Notification function is enabled
(checked). To disable the function, select Enable E-Mail Notification from
the Maintenance menu to clear the check box.
For additional information on using this option, refer to “Enable E-Mail
Notification” on page 160.