fw 05.01.00 and sw 07.01.00 edge switch 2/24 product manager user guide

Product Manager Overview
34 Edge Switch 2/24 Product Manager User Guide
options which are identical to those that display when you right-click the port,
port row, or port bar graph in those views. For detailed information on using
these options, refer to “Port Menu” on page 72.
FRU
Click a power supply module or cooling fan module in the Hardware View
only and select FRU from the Product menu to display the FRU Properties
menu option. This displays the FRU Properties dialog box. The FRU
Properties dialog box can also be displayed by double-clicking on the FRU in
the Hardware View. These are the same menu options as when you
double-click these components in the Hardware View. For details on these
options refer to “Displaying FRU Information” on page 63.
Clear System Error Light
Select this option to turn off the amber system error LED, located below the
green power LED on the switch front bezel.
Enable Unit Beaconing
Click the check box to toggle unit beaconing on or off. When the check box
has a check mark, unit beaconing is on, and the amber system error light on
the switch front bezel blinks to help users locate the actual unit in an
equipment room. When you click the check box to remove the check mark,
unit beaconing is disabled and the amber LED goes out. You can only enable
beaconing if there are no system errors (the system error light is off).
Properties
Click this option to display the Switch Properties dialog box. This dialog box
contains the switch name, description, location, and contact person configured
through the Configure Identification dialog box. Also included is other
product information as detailed in switch Properties. You can also display this
dialog box by double-clicking an area on the illustration in the Hardware
View, away from a hardware component.
Close
Select this option to close the Product Manager window.
Configure Menu
Click on the Configure menu on the menu bar to display the following options.
For detailed information on using these options, refer to “Configuring the Switch”
on page 101.