fw 05.01.00 and sw 07.01.00 edge switch 2/24 product manager user guide

Product Manager Overview
28 Edge Switch 2/24 Product Manager User Guide
■ Configure LIN alerts.
■ Configure Nickname to display instead of World Wide Name (WWN) for the
switch and attached devices.
■ Configure port binding and port speed.
■ Configure SNMP trap recipients and community names.
■ Configure Switch Binding if optional SANtegrity Binding feature is installed.
■ Configure Open Trunking if optional Open Trunking feature is installed.
■ Configure Open Systems Management Server Features (if installed).
■ Configure the switch name, location, description, and contact person.
■ Control individual Fibre Channel ports by blocking/unblocking operation,
enabling link incident (LIN) alerts and WWN binding, setting data speeds,
and running internal and external loopback diagnostics.
■ Display FRU properties such as the FRU name, physical position in the switch
(chassis slot number), active failed state, part number, and serial number.
■ Display information for individual Fibre Channel ports, such as the port name,
port number, Fibre Channel address, operational state, type of port, and login
data.
■ Display information on nodes attached to ports.
■ Display port performance and statistics.
■ Display vital product data for the switch, such as the system name,
description, contact person, location, status, model number, firmware and EC
level, and manufacturer.
■ Enable beaconing for ports and the switch unit.
■ Monitor the operational status of the switch and each of its hardware
field-replaceable units.
■ Perform an initial program load (IPL).
■ Perform maintenance tasks for the switch including maintaining firmware
levels, administering the call-home feature, accessing the switch logs, and
collecting data to support failure analysis.
■ Reset port operation.
■ Run port diagnostics.
■ Set the date and time on the switch.