fw 05.01.00 and sw 07.01.00 edge switch 2/24 product manager user guide

Product Manager Messages
199Edge Switch 2/24 Product Manager User Guide
This feature key does not
include all of the features
currently installed and
cannot be activated
while the switch is online.
The feature set currently
installed for this system
contains features that are
not being installed with
the new feature key. To
activate the new feature
key, you must set the
Edge Switch offline.
Activating the new
feature set, however, will
remove current features
not in the new feature
set.
Set the Edge Switch offline
through the Set Online
State dialog box, then
activate the new feature key
using the Configure
Feature Key dialog box.
This feature key does not
include all of the features
currently installed. Do
you want to continue
with feature key
activation?
The feature set currently
installed for this system
contains features that are
not being installed with
the new feature key.
Click Yes to activate the
feature key and remove
current features not in the
new feature set or No to
cancel.
Threshold alerts are not
supported on firmware
earlier than 01.03.00.
Threshold alerts are not
supported in firmware
releases before 1.03.00.
N/A. Informational
message.
Unable to change to
incompatible firmware
release.
The user tried to
download a firmware
release that is not
compatible with the
current product
configuration.
Refer to the release notes or
contact customer support.
Unable to save data
collection file to
destination.
Could not save data
collection file to the
specified drive (hard
drive, network).
Retry the operation. If the
condition persists, contact
support personnel.
You do not have rights to
perform this action.
User does not have the
rights to perform this
action.
N/A. Informational
message.
Table 5: StorageWorks Edge Switch 2/24 Product Manager Messages (Continued)
Message Description Action