fw 05.01.00 and sw 07.01.00 edge switch 2/24 product manager user guide

Product Manager Messages
198 Edge Switch 2/24 Product Manager User Guide
The firmware file is
corrupted.
A firmware file has
corrupt data.
Contact support personnel.
The firmware version
already exists.
Firmware version already
exists in the database.
N/A. An informational
message.
The HAFM server is busy
processing a request
from another Product
Manager
The HAFM server could
not process the current
request because it is busy
handling a request from
another Product
Manager.
Retry the operation later. If
the condition persists,
contact support personnel.
The link to the switch is
not available.
The link from the HAFM
server to the switch is not
available.
Check Ethernet connection.
The maximum number of
address configurations
has been reached.
The maximum number of
saved address
configurations has been
reached.
Delete configurations no
longer needed to allow new
configuration to be saved.
The optical transceiver is
not installed.
No information available
for a port that is not
installed.
Ensure the optical
transceiver is installed and
fully seated.
The switch did not
respond in the time
allowed.
A time out was reached
waiting for the switch to
respond to the action.
Try action again.
The IPL configuration
cannot be deleted.
Deletion of the IPL
address configuration
was attempted and was
not allowed.
Cancel the operation.
This feature has not been
installed. Please contact
your sales representative.
Indicator that the feature
has not been installed on
this switch.
Contact your sales
representative to obtain the
desired feature.
Table 5: StorageWorks Edge Switch 2/24 Product Manager Messages (Continued)
Message Description Action