fw 05.01.00 and sw 07.01.00 edge switch 2/24 product manager user guide

Product Manager Messages
194 Edge Switch 2/24 Product Manager User Guide
Invalid worldwide
Name.
Worldwide name must
have eight two-digit
hexadecimal numbers
separated by colons
(xx:xx:xx:xx:xx:xx:xx:xx)
Enter a worldwide name
using eight two-digit
hexadecimal numbers
separated by colons in the
format given in the
message.
Link dropped. Connection between
HAFM server and the
switch has been lost.
Wait for the connection to
re-establish. Link
re-connects are attempted
every 30 seconds.
Log is currently in use. Log is in use by another
Product Manager.
Retry the operation later.
Loopback plug(s) must be
installed on ports being
diagnosed. Press Next to
continue.
External loopback
diagnostics require an
optical loopback plug to
be installed.
Ensure that an optical
loopback plug is installed in
port optical transceiver
before running external
wrap diagnostic testing.
Maximum number of
versions already
installed.
The maximum number of
firmware versions has
been reached.
Delete a firmware version
before adding a new
firmware version.
No file was selected. Action requires you to
select a file
Select a file.
No firmware version file
was selected.
A file was not selected in
the Firmware Library
dialog box before an
action, such as modify or
send was performed.
Click a firmware version in
the dialog box to select it,
then perform the action
again.
No firmware versions to
delete.
There are no firmware
versions in the firmware
library to delete.
N/A. An informational
message.
Non-redundant switch
must be offline to install
firmware.
Since the switch has only
a single CTP card, it must
be offline to initiate a
firmware installation.
Note that the CTP card is
an internal component
and not a FRU.
Take switch offline and try
again.
Not all of the optical
transceivers are installed
for this range of ports.
Some ports in the
specified range do not
have optical transceivers
installed.
Use a port range that is
valid for the ports installed.
Table 5: StorageWorks Edge Switch 2/24 Product Manager Messages (Continued)
Message Description Action