fw 05.01.00 and sw 07.01.00 edge switch 2/24 product manager user guide

Product Manager Messages
191Edge Switch 2/24 Product Manager User Guide
Field has exceeded
maximum number of
characters.
The maximum number of
data entry characters
allowed in the field was
exceeded.
Enter the information using
the prescribed number of
characters.
File transfer aborted. User has stopped the file
transfer.
N/A. An informational
message.
File transfer is in
progress.
Firmware or data
collection is being
transferred.
N/A. An informational
message.
Firmware download
timed out.
The switch did not
respond in the time
allowed. The status of the
firmware install
operation is unknown.
Retry the operation. If the
problem persists, contact
support personnel.
Firmware file I/O error. Firmware file
input/output error
occurred.
Contact support personnel.
Firmware file not found. Firmware file deleted
from the HAFM server.
Add firmware to library.
Incorrect product type. When configuring a new
product through the New
Product dialog box, an
incorrect product was
selected for the network
address.
Select the correct product
type for the product with the
network address.
Installing this feature key,
while online, will cause
an IPL operation on the
switch and a momentary
loss of LAN connection.
This operation is
non-disruptive to the
Fibre Channel traffic. Do
you wish to continue
installing this feature
key?
If the Edge Switch is
online, installing the new
feature key will cause an
internal program load
(IPL). The LAN
connection to the HAFM
server will be lost
momentarily, but Fibre
Channel traffic will not
be affected.
Select Yes to install the
feature key or No to not
install.
Internal file transfer error
received from switch.
Switch detected an
internal file transfer error.
Contact support personnel.
Invalid character in field. Invalid character in the
input field.
Re-enter the field
information.
Table 5: StorageWorks Edge Switch 2/24 Product Manager Messages (Continued)
Message Description Action