fw 05.01.00 and sw 07.01.00 edge switch 2/24 product manager user guide

Product Manager Messages
189Edge Switch 2/24 Product Manager User Guide
Could not write firmware
to flash.
Firmware could not be
written to flash memory.
Try again. If problem
persists, contact support
personnel.
CUP name and port
name are identical.
Within the address
configuration, one or
more of the port names
are the same as the CUP
name.
Make sure all names are
unique for the ports and
CUP name.
Date entered is invalid. Date entered incorrectly. Verify that the number of
days in the month is valid.
Device applications
should be terminated
before starting
diagnostics. Press NEXT
to continue.
Device application is not
terminated.
Terminate device
application before running
port diagnostics.
[device WWN] cannot
be removed from the
Switch Membership List
while participating in
Switch Binding. The
device must be isolated
from the switch, or Switch
Binding deactivated
before it can be
removed.
User attempted to
remove a device WWN
from the Switch
Membership List
(SANtegrity Binding
feature) while Switch
Binding is enabled.
Remove the device from the
switch by blocking the port,
setting the switch offline, or
disabling Switch Binding
through the Switch Binding
Change State dialog box
before removing devices
form the Switch
Membership List.
Disabling Insistent
Domain ID will disable
Fabric Binding. Do you
want to continue?
Fabric Binding is
enabled through the
HAFM and user
attempted to disable
Insistent Domain ID in
the Configure Switch
Parameters dialog box.
Click Yes if you want to
continue and disable Fabric
Binding.
Disabling Switch Binding
will disable Enterprise
Fabric Mode. Do you
want to continue?
User attempting to
disable Switch Binding
through the Switch
Binding State Change
dialog box, but
Enterprise Fabric Mode
is enabled
Disable Enterprise Fabric
Mode using the Enterprise
Fabric Mode dialog box in
the HAFM before disabling
Switch Binding.
Do you want to continue
with IPL?
Requesting confirmation
to proceed with an IPL.
Click Yes to confirm the IPL
or Cancel to cancel the
operation.
Table 5: StorageWorks Edge Switch 2/24 Product Manager Messages (Continued)
Message Description Action