fw 05.01.00 and sw 07.01.00 edge switch 2/24 product manager user guide

Product Manager Messages
186 Edge Switch 2/24 Product Manager User Guide
Cannot retrieve
diagnostics results.
Diagnostics results
cannot be retrieved. The
link is down or busy.
Retry the operation later. If
the condition persists,
contact support personnel.
Cannot retrieve
information for port.
Information for the port
cannot be retrieved. The
link is down or busy.
Retry the operation later. If
the condition persists,
contact support personnel.
Cannot retrieve port
configuration.
Port configuration cannot
be retrieved. The link is
down or busy.
Retry the operation later. If
the condition persists,
contact support personnel.
Cannot retrieve port
information.
Port information cannot
be retrieved. The link is
down or busy.
Retry the operation later. If
the condition persists,
contact support personnel.
Cannot retrieve port
statistics.
Port statistics cannot be
retrieved. The link is
down or busy.
Retry the operation later. If
the condition persists,
contact support personnel.
Cannot retrieve switch
date and time.
Switch date and time
cannot be retrieved. The
link is down or busy.
Retry the operation later. If
the condition persists,
contact support personnel.
Cannot retrieve switch
state.
Switch state cannot be
retrieved. The link is
down or busy.
Retry the operation later. If
the condition persists,
contact support personnel.
Cannot run diagnostics
on a port that is failed.
Port diagnostics cannot
be performed on a port
that has failed.
Run diagnostics only on an
operational port.
Cannot run diagnostics
on an active E-port.
Port diagnostics cannot
be performed on an
active E-port.
Run diagnostics on an
E-port only when it is not
active.
Cannot run diagnostics
while a device is
logged-in to the port.
A device is logged in to
the port where a
diagnostic test is
attempted.
Log out the device and run
the diagnostic test again.
Cannot run diagnostics.
The port is not installed.
Port diagnostics cannot
be performed when the
port is not installed.
Run diagnostics only on a
port that is installed.
Cannot save port
configuration.
Port configuration cannot
be saved. The link is
down or busy.
Retry the operation later. If
the condition persists,
contact support personnel.
Table 5: StorageWorks Edge Switch 2/24 Product Manager Messages (Continued)
Message Description Action