fw 05.01.00 and sw 07.01.00 edge switch 2/24 product manager user guide

183Edge Switch 2/24 Product Manager User Guide
A
Product Manager Messages
This appendix lists and explains messages that may display in message boxes as
you use the Product Manager. Solutions to problems implied by each message are
included when applicable.
Table 5: StorageWorks Edge Switch 2/24 Product Manager Messages
Message Description Action
Activating this
configuration will
overwrite the current
configuration.
Confirmation to activate
a new address
configuration.
Click Yes to confirm
activating the new address
configuration or No to
cancel the operation.
All configuration names
must be unique.
All address
configurations must be
saved with unique
names.
Save the configuration with
a different name that is
unique to all saved
configurations.
All port names must be
unique.
A duplicate port name
was entered. Every
configured port name
must be unique.
Reconfigure the port with a
unique name.
Another Product
Manager is currently
performing a firmware
install.
Only one firmware install
to a specific switch can
take place at a time.
Wait for the current
firmware install to complete
and try again.
Are you sure you want to
delete firmware version?
Requesting confirmation
to delete the firmware
version. Firmware library
can hold only eight
firmware versions.
Click Yes to confirm the
firmware deletion or No to
cancel the operation.
Are you sure you want to
delete this address
configuration?
Confirmation to delete
the selected address
configuration.
Click Yes to confirm the
deletion of the address
configuration or No to
cancel the operation.