fw 05.01.00 and sw 07.01.00 edge switch 2/24 product manager user guide

Using Maintenance Features
163Edge Switch 2/24 Product Manager User Guide
■ SNMP configuration (trap recipients, community names, and write
authorizations).
■ Zoning configuration (active zone set and default zone state).
2. To backup data, click Backup.
3. When the dialog box appears confirming that the backup of configuration is
complete, click OK.
If the backup fails, a dialog box displays to inform you that the backup to the
server failed.
Restore
1. Set the switch offline before performing the restore function. For instructions,
refer to “Set Online State” on page 158.
2. Click Restore on the Backup and Restore Configuration dialog box to
restore the backed up configuration to the nonvolatile random access memory
(NV-RAM) on the switch.
Set the switch to offline before performing the restore function. If you select
Restore and the switch is online, a message dialog displays requesting that
you turn the switch offline. No action takes place when you close the dialog
box. For instructions on setting the switch offline or online, refer to “Set
Online State” on page 158.
If the switch is already offline and you click Restore, a confirmation dialog
box displays indicating that the restore will overwrite any existing
configuration already on the switch. The dialog box also displays the date of
the restored backup. Click OK
Note that the restore operation initiates an IPL.
3. Set the switch back online when the restore completes.