fw 05.01.00 and sw 07.01.00 edge switch 2/24 product manager user guide

Using Maintenance Features
160 Edge Switch 2/24 Product Manager User Guide
Enable E-Mail Notification
E-mail addresses and the simple mail transfer protocol (SMTP) server address for
e-mail notification of switch events must be configured through the HAFM
application. Refer to the HP StorageWorks HA-Fabric Manager User Guide for
instructions on configuring e-mail.
Note: E-mail recipients are configured in the HAFM through the Configure E-Mail
dialog box. A valid SMTP address is configured in this dialog box.
Use the Enable E-Mail Notification function on the Product Manager to enable
e-mail notification for events that occur on a selected switch. The default state is
disabled.
To enable e-mail notification, use the following steps:
1. Select Enable E-Mail Notification from the Maintenance menu on the menu
bar.
2. To enable e-mail notification, select the option to add a check mark to the
check box.
3. To disable e-mail notification, select the option to remove the check mark
from the check box.