fw 05.01.00 and sw 07.01.00 edge switch 2/24 product manager user guide

Configuring the Switch
123Edge Switch 2/24 Product Manager User Guide
2. Perform one of the following options:
Option 1: To immediately synchronize the switch date and time with the
HAFM server, click Sync Now. Make sure that a check mark is in the
Periodic Date/Time Synchronization check box.
Note: If you click Activate, the date and time synchronize at the next update period.
Option 2: To synchronize the switch date and time with a specific date and
time that you enter:
a. Make sure that Periodic Date/Time Synchronization is disabled (no
check). Refer to Figure 32.
Figure 32: Configure date and time manually
b. Click in a Date or Time field that you want to change.
c. Delete characters and enter new ones as required or highlight the existing
character by dragging the mouse cursor over the character and typing the
new character.
Note: When entering the hours, use the range of 0 to 23, for minutes and seconds, use
the range of 0 to 59.
d. Click Activate to set the date and time on the switch.
3. If you are finished configuring the switch, backup the configuration data. For
more information, refer to “Backing Up and Restoring Configuration Data”
on page 137.