fw 05.01.00 and sw 07.01.00 edge switch 2/24 product manager user guide

Configuring the Switch
120 Edge Switch 2/24 Product Manager User Guide
2. Select Features from the Configure menu on the menu bar.
The Configure Feature Key dialog box displays.
Figure 30: Configure Feature Key dialog box
3. Click New to add a new feature key.
4. In the New Feature Key dialog box, enter the switch’s feature key and click
OK.
— Feature keys are only valid for a switch with a specific serial number.
They cannot be interchanged between switches. If an error stating
Invalid serial number displays, verify that you have entered the
feature key that was assigned to the switch. To verify, check the serial
number of the switch through the Switch Properties dialog box and
compare it to the serial number listed in the documentation provided with
your feature key. Refer to “Displaying Switch Information” on page 68
for instructions on displaying the Switch Properties dialog box.
— The feature key is a string of alphanumeric characters with dashes. The
key is case-sensitive, so enter the key exactly as printed in the
documentation that you received for the feature. If an error stating
Invalid feature key displays, verify that you have entered the
feature key correctly.
The Enable Feature Key dialog box displays with a warning, stating that this
action will override the current set of features on the switch. The list in the left
column of the dialog box is a list of features that are active on the switch. The
list on the right is a set of features that come with the new feature key. All of
the features that are active are included in the new feature list.
5. Click Activate to activate the new feature key.
An IPL will occur, during which the Ethernet connection between the HAFM
server and switch is momentarily interrupted.