fw 05.01.00 and sw 07.01.00 edge switch 2/24 product manager user guide

Configuring the Switch
117Edge Switch 2/24 Product Manager User Guide
6. Enter user datagram protocol (UDP) port numbers in the UDP Port Number
column. You can override the default UDP port number of 162 with any legal
UDP port number (1 to 65535).
7. Click Activate to activate the data and close the dialog box.
The SNMP configuration is stored in NV-RAM on the switch.
8. If you are finished configuring the switch, backup the configuration data. For
more information, refer to “Backup and Restore Configuration” on page 162.