fw 05.01.00 and sw 07.01.00 edge switch 2/24 product manager user guide

Configuring the Switch
113Edge Switch 2/24 Product Manager User Guide
■ Bound WWN
Enter a worldwide name (WWN) in the proper format
(xx.xx.xx.xx.xx.xx.xx.xx) or a nickname configured through the HAFM
application. The device with this WWN or nickname will have exclusive
attachment to the port if Port Binding is enabled. If a valid WWN or
nickname is not entered in this field, but the Port Binding check box is
checked (enabled), then no devices can connect to the port. If you enter a
WWN or nickname in this field and do not place a check in the Port Binding
check box, the WWN or nickname will be stored, and all devices can connect
to the port.
To configure ports in open systems mode, use the following steps:
1. Select Ports from the Configure menu on the menu bar.
The Configure Ports dialog box displays.
Figure 28: Configure Ports dialog box
Ports are numbered from 0 through 23.
2. Click a Name field and type a name that reflects the end device connected
through the port. For example, use XYZ Server, where XYZ is the brand name
of the server.