fw 05.01.00 and sw 07.01.00 edge switch 2/24 product manager user guide

Configuring the Switch
110 Edge Switch 2/24 Product Manager User Guide
To configure fabric operating parameters
1. The switch must be offline to configure parameters in this dialog box. If it is
not and you activate values in this dialog box, a dialog box displays prompting
you to set the unit offline.
Caution: Setting the switch offline terminates all Fibre Channel connections.
To set the unit offline:
a. From the Product Manager window menu bar, select Maintenance > Set
Online State.
b. When the Set Online State dialog box displays, click Set Offline.
c. When the warning box displays asking you to confirm the offline state,
click OK.
2. Select Configure > Operating Parameters > Fabric Parameters.
The Configure Fabric Parameters dialog box displays.
Figure 27: Configure Fabric Parameters dialog box
Note: Ordinarily, you do not need to change values in this dialog box from their
defaults. Change this value if the switch will participate in a multi-switch fabric.
3. Use information described earlier in this section to change settings as required
for parameters in this dialog box.
4. After you change settings, click the Activate button.