32 Order and Configuration Guide

hp Storageworks 7

HP StorageWorks Edge switch rack assembly

HP StorageWorks Edge switches rack mounted

Edge switch 2/16

Edge switch 2/32 (3)

Plan for AC power:

Plan for facility power sources for each equipment rack. Edge Switches in a rack operate at 47 to 63 Hertz (Hz) and 100 to 230 volts

alternating current (VAC), and require a minimum dedicated 5-ampere service. If two power sources are supplied (optional but

recommended for high availability), the equipment rack contains two customer-specified external power cords. Each cord should be

connected to a separate power circuit, or both should be connected to an uninterruptible power supply (UPS). Several types of power

cables and plugs are available to meet local electrical requirements.

Edge switches Airflow: Front to Rear with a minimum of 3.0in (7.6 cm) clearance at Front/Rear of

switch.

Configuration Guide hp StorageWorks Edge switches