HP StorageWorks Director and Edge Switch release notes (5697-8176, April 2009)

Affected mod-

els

Description

Director 2/140

Director 2/64

In a FICON environment, the Director would provide an incorrect Interface Protocol Type

for Node Selector 0 in response to the inband query, Read Node Identifier.

AllDue to an internal error, some switches encountered Event 411, Firmware Fault, with Fault

Code 00000073. This has been corrected.

Edge Switch

2/24

Audit log entries showed the HAFM/EFCM server IP address as 0.0.0.0

Compatibility and interoperability

This section describes Edge Switch and Director product compatibility.

HAFM/EFCM and firmware compatibility

Table 3 lists the minimum version of HAFM/EFCM that can run with the various versions of firmware

for the Edge Switches and Directors.

Table 3 HAFM/EFCM and firmware compatibility

HAFM/EFCM versionFirmware version

EFCM 09.07.00 recommended

08.09.01 minimum (HAFM Appliance)

09.07.02

09.08.01

09.09.00

09.09.02

Standards compliance

Table 4 lists Fibre Channel standards compliance for firmware 09.09.02.

Table 4 Standards compliance

Specific StandardsCategory

FC-FLA

FC-FG

FC-GS-2

FC-GS-3

FC-GS-4

FC-MI

FC-PH-2

FC-PH-3

FC-PH Rev 4.3

FC-SW-2

Fibre Channel protocols