FW V06.XX/HAFM SW V08.02.00 HP StorageWorks SNMP Reference for Directors and Edge Switches (AA-RQ7BE-TE, July 2004)

SNMP Support
93SNMP Reference for Directors and Edge Switches
FcConnUnitC
ontrol
INTEGER Always return
unknown (1) on
read operation.
ResetConnUnit
WarmStart (4),
offlineConnUnit
(5), and
onlineConnUnit
(6) will be
supported by
PCP.
ResetConnUnit
WarmStart (4)
indicates IPL on
the switch is
performed.
ResetConnUnitC
oldStart (3) is
not supported.
R/W Is used to control the addressed
connectivity unit.
NOTE: "ColdStart" and
"WarmStart" are as defined in
mib-2 and are not meant to be a
factory reset.
ResetConnUnitColdStart: the
addressed unit performs a
"ColdStart" reset.
ResetConnUnitWarmStart: the
addressed unit performs a
"WarmStart" reset.
OfflineConnUnit: the addressed unit
puts itself into an implementation
dependant "offline" state. In
general, if a unit is in an offline
state, it cannot be used to perform
meaningful Fibre Channel work.
OnlineConnUnit: the addressed unit
puts itself into an implementation
dependant "online" state. In
general, if a unit is in an online
state, it is capable of performing
meaningful Fibre Channel work.
NOTE: Each implementation may
choose not to support SNMP Set
operations for any or all of these
values. For Sets specifying varbinds
for instances of this object and
values not supported by a given
implementation, the agent will return
the SNMP WrongValue PDU error
code.
The values are defined as follows:
unknown (1), invalid (2),
resetConnUnitColdStart (3),
resetConnUnitWarmStart (4),
offlineConnUnit (5), onlineConnUnit
(6).