FW V06.XX/HAFM SW V08.02.00 HP StorageWorks SNMP Reference for Directors and Edge Switches (AA-RQ7BE-TE, July 2004)

SNMP Support

86 SNMP Reference for Directors and Edge Switches

FcEventSeverit

INTEGER The set of values which define the event severity

that will be logged by this connectivity unit.

Values unknown (1) through debug (9) are

essentially self-explanatory; mark (10) means

that all messages are logged.

The values are defined as follows: unknown (1),

emergency (2), alert (3), critical (4), error (5),

warning (6), notify (7), info (8), debug (9), mark

(10).

FcUnitType INTEGER The values are defined as follows: unknown (1) –

cannot be determined, other (2) – none of the

following, hub (3) – passive connectivity unit

supporting loop protocol, switch (4) – active

connectivity unit supporting multiple protocols,

gateway (5) – unit that converts not only the

interface but also the frame into another

protocol. The assumption is that there are always

two gateways connected together. For example,

FC <-> ATM, converter (6) – unit that converts

from one interface to another, For example, FC

<-> SCSI, hba(7) – host bus adapter,

proxyAgent (8) – software proxy-agent,

storageDevice (9) – disk, cd, tape, etc, host (10)

– host computer, storageSubsystem (11) – raid,

library, etc, module (12) – subcomponent of a

system, swDriver (13) – software driver,

storageAccessDevice (14) – Provides storage

management and access for heterogeneous

hosts and heterogeneous devices.

FcPortFCClass BITS Represents the class(es) of service represented on

a given port, in a given operational context. The

values are defined as follows: unknown (0),

classF (1), class1(2), class2 (3), class3 (4), class4

(5), class5 (6), class6 (7).