FW V06.XX/HAFM SW V08.02.00 HP StorageWorks SNMP Reference for Directors and Edge Switches (AA-RQ7BE-TE, July 2004)

SNMP Support
84 SNMP Reference for Directors and Edge Switches
Note: All of the counters are 32-bit counters.
fcFxPortCapIn
termix
INTEGER SNMP R A flag indicating whether or not the
Fx_Port is capable of supporting the
intermixing of Class 2 and Class 3 frames
during a Class 1 connection. This flag is
valid only if the port is capable of
supporting Class 1 service. The values are
defined as follows: yes(1) and no(2).
This value is fixed no(2).
FcFxPortCapS
tackedConnM
ode
FcStackedCon
nMode
SNMP R A value indicating the mode of Stacked
Connect request that the Fx_Port is capable
of supporting.
This value is fixed at none(1).
FcFxPortCapC
lass2SeqDeliv
INTEGER SNMP R A flag indicating whether or not the
Fx_Port is capable of supporting Class 2
Sequential Delivery.
This value is fixed at yes(1).
FcFxPortCapC
lass3SeqDeliv
INTEGER SNMP R A flag indicating whether or not the
Fx_Port is capable of supporting Class 3
Sequential Delivery.
This value is fixed at yes(1).
FcFxPortCapH
oldTimeMax
MicroSeconds SNMP R The maximum holding time (in
microseconds) that the Fx_Port is capable
of supporting.
This value is not supported. It is always
zero.
FcFxPortCapH
oldTimeMin
MicroSeconds SNMP R The minimum holding time (in
microseconds) that the Fx_Port is capable
of supporting.
This value is not supported. It is always
zero.
FcFxPortCapB
audRates
Fc0BaudRate
Cap
FPM R A value indicating the set of baud rates
that the Fx_Port is capable of supporting.
This variable has been deprecated and
may be implemented for backward
compatibility.
FcFxPortCap
Media
Fc0MediaCap FPM R A value indicating the set of media that the
Fx_Port is capable of supporting.