FW V06.XX/HAFM SW V08.02.00 HP StorageWorks SNMP Reference for Directors and Edge Switches (AA-RQ7BE-TE, July 2004)

SNMP Support
75SNMP Reference for Directors and Edge Switches
FcFxPortPhysOper
Status
INTEGER FPM,
SNMP
R The current operational status of the
Fx_Port. The value testing(3) indicates
that no operational frames can be
passed. If fcFx_PortPhysAdminStatus is
offline(2), fcFx_PortPhysOperStatus
should be offline(2). If
fcFx_PortPhysAdminStatus is changed
to online(1), fcFx_PortPhysOperStatus
should change to online(1) if the
Fx_Port is ready to accept Fabric Login
request from the attached NxPort. It
should proceed and remain in the
link-failure(4) state if and only if there is
a fault that prevents it from going to the
online(1) state. The values are defined
as follows: online(1) – Login may
proceed, offline(2) – Login cannot
proceed, testing(3) – port is under test,
link-failure(4) – failure after
online/testing.
See “Port State Descriptions” on
page 145.
FcFxPortPhysLastC
hange
TimeTicks SNMP R The value of sysUpTime at the time the
Fx_Port entered its current operational
status. A value of zero indicates that the
Fx_Port’s operational status has not
changed since the agent last restarted.
This is SS_TIM_RD_TICKS(MILLISEC) *
10.
FcFxPortPhysRttov MilliSecond
s
SNMP R The Receiver_Transmitter_Timeout value
of the Fx_Port. This is used by the
receiver logic to detect Loss of
Synchronization.
This value is fixed at 100ms.