FW V06.XX/HAFM SW V08.02.00 HP StorageWorks SNMP Reference for Directors and Edge Switches (AA-RQ7BE-TE, July 2004)

SNMP Support
74 SNMP Reference for Directors and Edge Switches
Fx_Port Physical Level Table
A table that contains one entry for each Fx_Port in the Fabric Element, physical
level status and parameters of the Fx_Port.
s
Fabric Element
MIB Object
Name
Type
Provided
By
Access Description
fcFxPortPhysFxPort
Index
FcFeFxPortIn
dex
SNMP R Identifies the Fx_Port within the module.
This number ranges from 1 to the value
of fcFeModulePortCapacity for the
associated module. The value remains
constant for the identified Fx_Port until
the module is re-initialized.
FcFxPortPhysAdmi
nStatus
INTEGER PCP, FPM R/W The desired state of the Fx_Port. A
management station may place the
Fx_Port in a desired state by setting this
object accordingly. The testing(3) state
indicates that no operational frames
can be passed. When a Fabric Element
initializes, all Fx_Port start with
fcFx_PortPhysAdminStatus in the
offline(2) state. As the result of either
explicit management action or per
configuration information accessible by
the Fabric Element,
fcFx_PortPhysAdminStatus is then
changed to either the online(1) or
testing(3) states, or remains in the
offline state. The values are defined as
follows: online(1) – place port online,
offline(2) – take port offline, testing (3).
If the port cannot be set to testing
because it is inactive or in a failed state,
the return value will be
resource_unavailable(13).