FW V06.XX/HAFM SW V08.02.00 HP StorageWorks SNMP Reference for Directors and Edge Switches (AA-RQ7BE-TE, July 2004)

SNMP Support
63SNMP Reference for Directors and Edge Switches
Fabric Element Management MIB
There are five groups of objects defined in the Fabric Element Management MIB.
Fabric Element Management MIB Tables
snmpOutGetRespons
es
Counter R The total number of SNMP Get-Response
PDUs which have been generated by the
SNMP protocol entity.
snmpOutTraps Counter R The total number of SNMP Trap PDUs
which have been generated by the SNMP
protocol entity.
snmpEnableAuthenTr
aps
INTEGER RW Indicates whether the SNMP agent
process is permitted to generate
authentication-failure traps. The value of
this object overrides any configuration
information; as such, it provides a means
whereby all authentication-failure traps
may be disabled. Note that it is strongly
recommended that this object be stored in
non-volatile memory so that it remains
constant between re-initializations of the
network management system.
Values:
enabled(1),
disabled(2)
Type Syntax Description
DisplayString OCTET STRING
MilliSeconds INTEGER (0..2147383647) 2^31 – 1
MicroSeconds INTEGER (0..2147383647)
FcNameId OCTET STRING (SIZE(8)) World Wide Name or Fibre Channel Name
associated with an FC entity. This is a
Network_Destination_ID or
Network_Source_ID composed of a value up
to 60 bits wide, occupying the remaining 8
bytes, while the first nibble identifies the
format of the Name_Identifier with hex values:
0: ignored, 1: IEEE 48-bit address, 2: IEEE
extended, 3: Locally assigned, 4: 32-bit IP
address.