FW V06.XX/HAFM SW V08.02.00 HP StorageWorks SNMP Reference for Directors and Edge Switches (AA-RQ7BE-TE, July 2004)

SNMP Support
39SNMP Reference for Directors and Edge Switches
ifMtu INTEGER R The size of the largest datagram that can
be sent/received on the interface,
specified in octets. For interfaces that are
used for transmitting network datagrams,
this is the size of the largest network
datagram that can be sent on the
interface.
ifSpeed Gauge R An estimate of the interface's current
bandwidth in bits per second. For
interfaces which do not vary in bandwidth
or for those where no accurate estimation
can be made, this object should contain
the nominal bandwidth.
ifPhysAddress PhysAddress R The interface's address at the protocol
layer immediately “below” the network
layer in the protocol stack. For interfaces
which do not have such an address (for
example, a serial line), this object should
contain an octet string of zero length.
ifAdminStatus INTEGER RW The desired state of the interface. The
testing(3) state indicates that no
operational packets can be passed.
ifOperStatus INTEGER R The current operational state of the
interface. The testing(3) state indicates
that no operational packets can be
passed.
ifLastChange TimeTicks R The value of sysUpTime at the time the
interface entered its current operational
state. If the current state was entered prior
to the last re-initialization of the local
network management subsystem, this
object contains a zero value.
ifInOctets Counter R The total number of octets received on the
interface, including framing characters.
ifInUcastPkts Counter R The number of subnetwork-unicast
packets delivered to a higher-layer
protocol.
ifInNUcastPkts Counter R The number of non-unicast (i.e.,
subnetwork-broadcast or
subnetwork-multicast) packets delivered to
a higher-layer protocol.