FW V06.XX/HAFM SW V08.02.00 HP StorageWorks SNMP Reference for Directors and Edge Switches (AA-RQ7BE-TE, July 2004)

SNMP Support
25SNMP Reference for Directors and Edge Switches
Following are sections describing each trap, and the variables within the traps. For
each variable, the OID is expressed as a numeric value first, followed by a second
line showing the symbolic object name. Appended to the right of the OIDs are the
index values for each object. Most of the objects within traps are actually table
values.
Each SNMP table value must have an index appended to identify a specific table
row. For example, the enterprise-specific port status change trap has the variable
binding for fcEosPortOpStatus, which is a table entry value. So the OID for
fcEosPortOpStatus (1.3.6.1.4.1.289.2.1.1.2.3.1.1.3) specifies a table column. To
get a value for a specific port, the table index (port_number) must be appended to
the OID. If the trap occurred because of a change on port 5, the actual variable
OID would be 1.3.6.1.4.1.289.2.1.1.2.3.1.1.3.5.
Enterprise-specific Port Status Change Trap
This trap is sent for each port that has a status change. There is one variable
binding, as follows:
Switch SCN Alert Change in
switch
status.
FC-MGMNT 1.3.6.1.2.1.8888.0.1 YES YES
Event SCN Info New system
event was
generated.
FC-MGMNT 1.3.6.1.2.1.8888.0.3 YES YES
Sensor SCN Alert Change in
status for
FAN/FAN2/
POWER
FRUs.
FC-MGMNT 1.3.6.1.2.1.8888.0.4 YES YES
Port SCN Alert Change in
port status.
FC-MGMNT 1.3.6.1.2.1.8888.0.5 YES YES
Binding OID Value
1 1.3.6.1.4.1.289.2.1.1.2.3.1.1.3.port_number
fcEosPortOpStatus.port_number
New status value. See definition for
“fcEosPortOpStatus” on page 133.