FW V06.XX/HAFM SW V08.02.00 HP StorageWorks SNMP Reference for Directors and Edge Switches (AA-RQ7BE-TE, July 2004)

SNMP Support
141SNMP Reference for Directors and Edge Switches
Threshold Alert Table
fcEosMemberWWN ZoneSetState R The WWN name as an 8-character
string. This value is only valid if the
member type is 1, otherwise it will default
to 0.
fcEosMemberDomainID INTEGER R The domain ID. This value is only valid if
the member type is 2, otherwise it will
default to NULL.
fcEosMemberPortNumber INTEGER R The port number. This value is only valid if
the member type is 2, otherwise it will
default to NULL.
FCEOS MIB Object
Name
Type Access Description
fcEosTAIndex INTEGER R Is used to identify which threshold has
been triggered.
fcEosTAName DisplayString
(SIZE (1..64))
R The threshold alert name.
fcEosTAState INTEGER R The current state of the threshold.
(Enabled = 1, disabled = 2)
fcEosTAType INTEGER R The type of the threshold. (throughput = 1,
counter = 2)
fcEosTAPortType INTEGER R A threshold can be set on a list of physical
port numbers or on all the ports of the
specified type (ePorts, fPorts). (list = 1,
ePorts = 2, fPorts = 3, flPorts = 4)
fcEosTAPortList fcEosPortList R A bit map that identifies which ports this
threshold alert applies to (only valid if the
Threshold Alert Port Type = list). The
left-most bit represents the port 0.
fcEosTAInterval INTEGER R The number of minutes in a threshold alert
interval.
fcEosTATriggerValue INTEGER R If the alert type is a Throughput Threshold
Alert, this is the percent utilization (1-100)
required to trigger an alert. If the alert
type is a Counter Threshold Alert, this is
the counter delta required to trigger an
alert.