FW V06.XX/HAFM SW V08.02.00 HP StorageWorks SNMP Reference for Directors and Edge Switches (AA-RQ7BE-TE, July 2004)

SNMP Support
124 SNMP Reference for Directors and Edge Switches
Name Server Table
This table is accessed either directly (if the management software has an index
value) or via GetNexts. The values of the indexes need not be contiguous. Each
entry created in this table will be assigned an index. This relationship is kept
presistent until the entry is removed from the table, or the system is reset. The
total number of entries is defined by the size of the table.
FcConnUnitPo
rtStatCountFr
amesTruncate
d
Counter6
4
stFramesTooShort (Only
supports low 32-bits of
counter, high 32-bits are set to
zero)
R Count of frames received
at this port where the
frame length was less than
the minimum indicated by
the frame header –
normally 24 bytes, but it
could be more if the
DFCTL field indicates an
optional header should
have been present. Note,
this is a Fibre Channel
only stat.
fcConnUnitPo
rtStatCountAd
dressErrors
Counter6
4
stAddrIDErrors (Only supports
low 32-bits of counter, high
32-bits are set to zero)
R Count of frames received
with unknown addressing.
For example, unknown
SID or DID. The SID or DID
is not known to the routing
algorithm. Note. This is a
Fibre Channel only stat.
FcConnUnitPo
rtStatCountDe
limiterErrors
Counter6
4
stDelimiterErrors (Only
supports low 32-bits of
counter, high 32-bits are set to
zero)
R Count of invalid frame
delimiters received at this
port. An example is a
frame with a class 2 start
and a class 3 at the end.
Note, this is a Fibre
Channel only stat.
FcConnUnitPo
rtStatCountEn
codingDispari
tyErrors
Counter6
4
Not supported R Count of disparity errors
received at this port. Note,
this is a Fibre Channel
only stat.