FW V06.XX/HAFM SW V08.02.00 HP StorageWorks SNMP Reference for Directors and Edge Switches (AA-RQ7BE-TE, July 2004)

SNMP Support
122 SNMP Reference for Directors and Edge Switches
FcConnUnitPo
rtStatCountNu
mberLinkReset
s
Counter6
4
StLinkResetsIn +
stLinkResetsOut (Only supports
low 32-bits of counter, high
32-bits are set to zero.)
R Count of Link resets and
LIPs detected at this port.
The number times the reset
link protocol is initiated.
These are the count of the
logical resets, a count of
the number of primitives.
Note, this is a Fibre
Channel only stat.
FcConnUnitPo
rtStatCountRx
OfflineSequen
ces
Counter6
4
StOlssIn (Only supports low
32-bits of counter, high
32-bits are set to zero.)
R Count of Offline Primitive
OLS received at this port.
Note, this is a Fibre
Channel only stat.
FcConnUnitPo
rtStatCountTx
OfflineSequen
ces
Counter6
4
StOlssOut (Only supports low
32-bits of counter, high
32-bits are set to zero.)
R Count of Offline Primitive
OLS transmitted by this
port. Note, this is a Fibre
Channel only stat.
FcConnUnitPo
rtStatCountNu
mberOfflineS
equences
Counter6
4
stOlssIn + stOlssOut (Only
supports low 32-bits of
counter, high 32-bits are set to
zero.)
R Count of Offline Primitive
sequences received at this
port. Note, this is a Fibre
Channel only stat.
FcConnUnitPo
rtStatCountLin
kFailures
Counter6
4
stLinkFailures (Only supports
low 32-bits of counter, high
32-bits are set to zero.)
R Count of link failures. This
count is part of the Link
Error Status Block (LESB).
(FC-PH 29.8). Note, this is
a Fibre Channel only stat.
FcConnUnitPo
rtStatCountInv
alidCRC
Counter6
4
stInvalidCrcs (Only supports
low 32-bits of counter, high
32-bits are set to zero.)
R Count of frames received
with invalid CRC. This
count is part of the Link
Error Status Block (LESB).
(FC-PH 29.8). Loop ports
should not count CRC
errors passing through
when monitoring. Note,
this is a Fibre Channel
only stat.
FcConnUnitPo
rtStatCountInv
alidTxWords
Counter6
4
stInvalidTxWords (Only
supports low 32-bits of
counter, high 32-bits are set to
zero.)
R Count of invalid
transmission words
received at this port. This
count is part of the Link
Error Status Block (LESB).
(FC-PH 29.8). Note, this is
a Fibre Channel only stat.