FW V06.XX/HAFM SW V08.02.00 HP StorageWorks SNMP Reference for Directors and Edge Switches (AA-RQ7BE-TE, July 2004)

SNMP Support
121SNMP Reference for Directors and Edge Switches
FcConnUnitPo
rtStatCountCl
ass3TxFrames
Counter6
4
stC3FramesOut (64-bit
counter)
R Count of Class 3 Frames
transmitted out this port.
Note, this is a Fibre
Channel only stat.
FcConnUnitPo
rtStatCountCl
ass3Discards
Counter6
4
stC3Discards (64-bit counter) R Count of Class 3 Frames
that were discarded upon
reception at this port.
There is no FBSY or FRJT
generated for Class 3
Frames. They are simply
discarded if they cannot
be delivered. Note, this is
a Fibre Channel only stat.
FcConnUnitPo
rtStatCountRx
MulticastObje
cts
Counter6
4
Not supported R Count of Multicast Frames
or Packets received at this
port.
FcConnUnitPo
rtStatCountTx
MulticastObje
cts
Counter6
4
Not supported R Count of Multicast Frames
or Packets transmitted out
this port.
FcConnUnitPo
rtStatCountRx
BroadcastObj
ects
Counter6
4
Not supported R Count of Broadcast
Frames or Packets
received at this port.
FcConnUnitPo
rtStatCountTx
BroadcastObj
ects
Counter6
4
Not supported R Count of Broadcast
Frames or Packets
transmitted out this port.
On a Fibre Channel loop,
count only OPNr frames
are generated.
FcConnUnitPo
rtStatCountRx
LinkResets
Counter6
4
StLinkResetsIn (Only supports
low 32-bits of counter, high
32-bits are set to zero.)
R Count of Link Resets. This
is the number of LRs
received. Note, this is a
Fibre Channel only stat.
FcConnUnitPo
rtStatCountTxL
inkResets
Counter6
4
stLinkResetsOut (Only supports
low 32-bits of counter, high
32-bits are set to zero.)
R Count of Link Resets. This
is the number LRs
transmitted. Note, this is a
Fibre Channel only stat.