FW V06.XX/HAFM SW V08.02.00 HP StorageWorks SNMP Reference for Directors and Edge Switches (AA-RQ7BE-TE, July 2004)

SNMP Support
120 SNMP Reference for Directors and Edge Switches
FcConnUnitPo
rtStatCountCl
ass2FBSYFra
mes
Counter6
4
stC2FabricBusy (Only
supports low 32-bits of
counter, high 32-bits are set to
zero)
R Count of times that FBSY
was returned to this port
as a result of a Class 2
Frame that could not be
delivered to the other end
of the link. This occurs if
either the Fabric or the
destination port is
temporarily busy. FBSY
can only occur on SOFc1
frames (the frames that
establish a connection).
Note, this is a Fibre
Channel only stat.
FcConnUnitPo
rtStatCountCl
ass2PBSYFra
mes
Counter6
4
Not supported R Count of times that PBSY
was returned to this port
as a result of a Class 2
Frame that could not be
delivered to the other end
of the link. This occurs if
the destination N_Port is
temporarily busy. PBSY
can only occur on SOFc1
frames (the frames that
establish a connection).
Note, this is a Fibre
Channel only stat.
FcConnUnitPo
rtStatCountCl
ass2FRJTFram
es
Counter6
4
stC2FabricReject (Only
supports low 32-bits of
counter, high 32-bits are set to
zero)
R Count of times that FRJT
was returned to this port
as a result of a Class 2
Frame that was rejected
by the fabric. Note, this is
a Fibre Channel only stat.
FcConnUnitPo
rtStatCountCl
ass2PRJTFram
es
Counter6
4
Not supported R Count of times that FRJT
was returned to this port
as a result of a Class 2
Frame that was rejected at
the destination N_Port.
Note, this is a Fibre
Channel only stat.
FcConnUnitPo
rtStatCountCl
ass3RxFrames
Counter6
4
stC3FramesIn (64-bit counter) R Count of Class 3 Frames
received at this port. Note,
this is a Fibre Channel
only stat.