FW V06.XX/HAFM SW V08.02.00 HP StorageWorks SNMP Reference for Directors and Edge Switches (AA-RQ7BE-TE, July 2004)

SNMP Support
117SNMP Reference for Directors and Edge Switches
FcConnUnitPo
rtStatCountBB
CreditZero
Counter6
4
Not supported R Count of transitions in/out
of Bbcredit zero state. The
other side is not providing
any credit. Note, this is a
Fibre Channel stat only.
FcConnUnitPo
rtStatCountInp
utBuffersFull
Counter6
4
Not supported R Count of occurrences
when all input buffers of a
port were full and
outbound buffer-to-buffer
credit transitioned to zero.
There is no credit to
provide to other side.
Note, this is a Fibre
Channel stat only.
FcConnUnitPo
rtStatCountFB
SYFrames
Counter6
4
Not supported R Count of times that FBSY
was returned to this port
as a result of a frame that
could not be delivered to
the other end of the link.
This occurs if either the
Fabric or the destination
port is temporarily busy.
Port can only occur on
SOFc1 frames (the frames
that establish a
connection). Note, this is a
Fibre Channel only stat.
This is the sum of all
classes. If you cannot keep
the class counters, keep
the sum counters.
FcConnUnitPo
rtStatCountPB
SYFrames
Counter6
4
Not supported R Count of times that PBSY
was returned to this port
as a result of a frame that
could not be delivered to
the other end of the link.
This occurs if the
destination port is
temporarily busy. PBSY
can only occur on SOFc1
frames (the frames that
establish a connection).
Note, this is a Fibre
Channel only stat. This is
the sum of all classes. If
you cannot keep the class
counters, keep the sum
counters.