FW V06.XX/HAFM SW V08.02.00 HP StorageWorks SNMP Reference for Directors and Edge Switches (AA-RQ7BE-TE, July 2004)

SNMP Support
114 SNMP Reference for Directors and Edge Switches
FcConnUnitLi
nkNodeIdY
OCTET
STRING
(SIZE(16))
The attached node WWN
on the link. This information
is available for E_Ports and
F_Ports. E port nodeIdY can
be retrieved from RNID, F
port NodeIdY is supported
by FLOGI.
R
The node WWN of the unit
at the other end of the link. If
the node WWN is unknown
and the node is an
fcConnUnit in the
responding SNMP agent,
the value of this object
must
be equal to its fcConnUnitId.
FcConnUnitLi
nkPortNumbe
rY
Integer32 The attached port number
on the link. For F port, -1 is
returned.
R The port number on the unit
specified by
fcConnUnitLinkNodeIdY if
known, otherwise –1. If the
value is non-negative, it will
be equal to
fcConnUnitPortPhysicalNum
ber.
FcConnUnitLi
nkPortWwnY
OCTET
STRING
The attached port WWN on
the link. For E_Ports, returns
the WWN of the connected
switch.
R The port WWN on the unit
specified by
fcConnUnitLinkNodeIdY if
known, otherwise 16 octets
of binary 0.
FcConnUnitLi
nkAgentAddr
essY
OCTET
STRING
(SIZE(16))
R The address of an FCMGMT
MIB agent for the node
identified by
fcConnUnitLinkNodeIdY, if
known; otherwise 16 octets
of binary 0.
FcConnUnitLi
nkAgentAddr
essTypeY
Unsigned
32
RIf
fcConnUnitLinkAgentAddres
sY is non-zero, it is a
protocol address.
FcConnUnitLinkAgentAddres
sTypeY is the "address
family number" assigned by
IANA to identify the address
format. (For example, 1 is
Ipv4, 2 is Ipv6.)