FW V06.XX/HAFM SW V08.02.00 HP StorageWorks SNMP Reference for Directors and Edge Switches (AA-RQ7BE-TE, July 2004)

SNMP Support
106 SNMP Reference for Directors and Edge Switches
FcConnUnitPo
rtPhysicalNu
mber
Unsigned
32
Physical port number from
0 to Maximum port number
– 1
R The internal port number this
port is known by. In many
implementations, this should
be the same as
fcConnUnitPortIndex. Some
implementations may have
an internal port
representation not
compatible with the rules for
table indexes. In that case,
provide the internal
representation of this port in
this object. This value may
also be used in the
fcConnUnitLinkPortNumberX
or
fcConnUnitLinkPortNumberY
objects of the
fcConnUnitLinkTable.
FcConnUnitPo
rtProtocolCap
(added from
Mib3.0)
OCTET
STRING
(SIZE (2))
If the port is Not installed
fcConnUnitPortProtocolCap
= 0
else if ES-1000
H_Port 1 = Loop(1)
B_Port 2 = Fabric(2)
else it depends on the
configured Port Type:
Gx_Port 3 = Loop(1) +
Fabric(2)
G_Port 2 = Fabric(2)
Fx_Port 3 = Loop(1) +
Fabric(2)
F_Port 2 = Fabric(2)
E_Port 2 = Fabric(2)
R Bit mask that specifies the
driver-level protocol
capability of this port. If this
is not applicable, return all
bits set to zero.
The bits have the following
definition: unknown – 0,
Loop – 1, Fabric – 2,
SCSI – 4, TCP/IP - 8, VI –
16, FICON – 32.