FW V06.XX/HAFM SW V08.02.00 HP StorageWorks SNMP Reference for Directors and Edge Switches (AA-RQ7BE-TE, July 2004)

SNMP Support
103SNMP Reference for Directors and Edge Switches
FcConnUnitPo
rtControl
INTEGER ResetConnUnitPort(3),
offlineConnUnitPort(6),
onlineConnUnitPort(7), and
portFailure(42501) are the
only set-operations
supported. Always return
unknown(1) on read.
R/W Is used to control the
addressed fcConnUnit’s port.
Valid commands are:
Unknown (1) and invalid (2)
are only used as values that
are read.
ResetConnUnitPort (3): If the
addressed connectivity unit
allows this operation to be
performed on this port, the
addressed port performs a
vendor-specific "reset"
operation. Examples of these
operations are: the Link Reset
protocol, the Loop
Initialization protocol, or a
resynchronization occurring
between the transceiver in
the addressed port to the
transceiver that the port is
connected to.
BypassConnUnitPort (4): If
the addressed connectivity
unit allows this operation to
be performed on this port,
the addressed port performs
a vendor-specific "bypass"
operation. Examples of these
operations are: transitioning
from online to offline, a
request (nonParticipating)
command to the Loop Port
state machine, or removal of
the port from an arbitrated
loop by a hub.
UnbypassConnUnitPort (5): If
the addressed connectivity
unit allows this operation to
be performed on this port,
the addressed port performs
a vendor-specific
"unbypass" operation.
(continued in next cell)