FW V06.XX/HAFM SW V08.02.00 HP StorageWorks SNMP Reference for Directors and Edge Switches (AA-RQ7BE-TE, July 2004)

SNMP Support
102 SNMP Reference for Directors and Edge Switches
fcConnUnitPo
rtModuleType
INTEGER If the port is not installed,
return gbicNotInstalled(8).
Otherwise return
smallFormFactor(9).
R The module type of the port
connector. This object refers
to the hardware
implementation of the port.
The embedded value (4)
means "fixed" (for example,
oneXnine).
The values are defined as
follows: unknown (1), other
(2), gbic (3), embedded (4),
glm(5), gbicSerialId (6),
gbicNoSerialId (7),
gbicNotInstalled (8),
smallFormFactor (9).
FcConnUnitPo
rtWwn
FcNameI
d
World Wide Name of the
port.
R The World Wide Name of
the port. If applicable;
otherwise empty string.
FcConnUnitPo
rtFCId
OCTET
STRING
(SIZE(3))
If this is an F-port, return
fabric address of the node
in form of [domain, area,
node]. (Supported by Login
Server)
If this is an E-port, return
left-adjusted domain ID of
the switch.
R The assigned Fibre Channel
ID of this port. This value is
expected to be a Big Endian
value of 24 bits. If this is a
loop, it is the ALPA that is
connected. If this is an
E_port, it will only contain
the domain ID left justified,
zero filled. If this port does
not have a Fibre Channel
address, return all bits set to
1.
FcConnUnitPo
rtSerialNoSn
SnmpAd
minString
Not applicable. R The serial number
identification of the unit (for
example, for a GBIC). If this
is not applicable, return a
zero-length string.
FcConnUnitPo
rtRevision
SnmpAd
minString
Not applicable. R The port revision (for
example, for a GBIC).
FcConnUnitPo
rtVendor
SnmpAd
minString
Not applicable. R The port vendor (for
example, for a GBIC).
FcConnUnitPo
rtSpeed
Gauge32 Return 100000 kilobytes
for 1 Gb/s switches and
200000 kilobytes for 2
Gb/s switches.
R The speed of the port in
kilobytes per second.