FW V06.XX/HAFM SW V08.02.00 HP StorageWorks SNMP Reference for Directors and Edge Switches (AA-RQ7BE-TE, July 2004)

SNMP Support
101SNMP Reference for Directors and Edge Switches
FcConnUnitPo
rtStatus
INTEGER See “Port State
Descriptions” on
page 145.
R The current overall protocol
status for the port. The
warning value (4) means that
the port needs attention; the
notParticipating value (6)
means that protocol is not
being processed; the
initializing value (7) means
that the port is in the process
of coming into service; the
bypassed value (8) means
that the port has been
manually or automatically
isolated from the loop or
fabric; the other values are
essentially self-explanatory.
Any value for this object may
co-exist with any value for
the fcConnUnitPortState
object. The values are
defined as follows: unknown
(1), unused (2), ok (3),
warning (4), failure (5),
notParticipating (6),
initializing (7), bypassed (8).
FcConnUnitPo
rtTransmitterT
ype
INTEGER Mapped from the port
technology as follows: not
present and serial indicate
unknown(1), optical sw1g
and optical sw2g indicate
shortwave(4). Optical lw1g
and optical lw2g indicate
longwave(5), copper db9
and copper amp indicate
copper(6).
R The technology of the port
transceiver. The values are
defined as follows: unknown
(1), other (2), unused (3),
shortwave (4) longwave (5),
copper (6), scsi (7),
longwaveNoOFC (8),
shortwaveNoOFC (9),
longwaveLED (10).