FW V06.XX/HAFM SW V08.02.00 HP StorageWorks Embedded Web Server User Guide (AA-RTDRC-TE, July 2004)

Configuring the Product
78 Embedded Web Server User Guide
The feature key can be installed while the product is online, except in the
following circumstances:
■ With E/OS 3.0 or earlier, the product must be offline before a feature can be
enabled.
■ If the new feature key removes existing functionality, the product must be
offline during the installation process.
(See “Setting Product Online or Offline” on page 137 for instructions on setting
the product offline.)
After obtaining the feature key, install the feature as follows:
1. Choose Operations from the navigation panel. The Operations page opens.
2. Click the Feature Installation tab. The Feature Installation tab view
displays (Figure 20).
Note: If the new feature key is removing an existing feature of your system, you must
set the switch offline before completing the feature activation process.
Figure 20: Feature Installation tab view
3. Type the feature key and click Activate. The interface displays a confirmation
page with a warning, stating this action overrides the current set of product
features.