FW V06.XX/HAFM SW V08.02.00 HP StorageWorks Embedded Web Server User Guide (AA-RTDRC-TE, July 2004)

Configuring the Product
40 Embedded Web Server User Guide
Note: Some older versions of EWS may show the Zoning Configuration Change
RSCNs field for this item. The functionality is the same.
f. If you are configuring parameters for the Director 2/64, a Switch Speed
field is displayed. Choose 1 Gb/sec or 2 Gb/sec. These options specify
the speed used on the switch. This field is valid only for the Director 2/64,
which is able to run at both speeds.
4. Click Activate to save and activate the changes. The following message
displays: Your changes to the operating parameters
configuration have been successfully activated.
5. If fabric parameters require configuration, go to “Configuring Fabric
Parameters” on page 41. If the configuration is complete, set the product
online as follows:
a. Choose Operations from the navigation panel. The Operations page
displays.
b. Click the Online State tab, then click Set Online. The following message
displays: Your operations changes have been
successfully activated.