FW V06.XX/HAFM SW V08.02.00 HP StorageWorks Embedded Web Server User Guide (AA-RTDRC-TE, July 2004)

Configuring the Product
35Embedded Web Server User Guide
Configuring Product Identification
Perform this procedure to configure the HP product’s name, description, location,
and contact person. The Name, Location, and Contact variables configured here
correspond respectively to the variables used by SNMP management workstations
when obtaining data from managed edge switches or directors. To configure
identification:
1. Choose Configure from the navigation panel. Choose the Switch or Director
tab, as appropriate. The Switch or Director tab displays with the
Identification tab view (Figure 5).
Figure 5: Configure product Identification tab view
a. Type a name of 24 alphanumeric characters or less in the Name field.
Each product should be configured with a unique name.
If the product is installed on a public LAN, it is recommended that the
name reflect the product’s Ethernet network domain name system (DNS)
host name. For example, if the DNS host name is
edgeswitch224.hp.com, the name entered in this dialog box should
be edgeswitch224.
Note: Spaces are allowed in the Name field.
b. Type a product description of 255 alphanumeric characters or less in the
Description field.